Reconstructed guide SimXPro publishes no written manual for the XT120 V2. This guide is rebuilt from the facts the brand publishes: the parts list, the drilled holes and the 9 steps of its 3D guide (November 2026), its XT160 assembly video , the same build on 40 × 120 base and cross profiles (SimXPro publishes none for the XT120; its 3D guide loads the XT160's plate files, the same ones), and its product page . Lengths, thicknesses and counts are theirs; so are the overall sizes of the plates (measurements taken on its 3D guide, November 2026); their outlines and holes are redrawn here and marked "≈". Their steps 4, 5 and 6 play here in two (4.1 and 4.2...): a CoreBolt goes in two turns first, then the profile slides over its head and it is tightened through a bore. Check each step against the video.
15 profiles including two 40 × 120, the extended pedal deck and its heel rest, the flat-to-front wheel mount , the corner brackets, the hardware, 4 adjustable feet and the end caps.
Build My Rig guide, not affiliated with SimXPro. Parts, order and gestures taken from SimXPro's assembly video, the lengths it does not state read off its frames and photos; check every step against the video.